Electrolux EMP-800 Service Manual download pdf (Page 31)

wh Münzprüfer Dietmar Trenner GmbH, Germany Technical Manual EMP 8x0.00/04/13 v5

Version 1.51

EMP8x0.00/04/13 v5 subject to technical modification page 31/42

3.3.3 Basic Commands

Command Code Data

RESET 78h -

The acceptance of coins is blocked. The response to the next poll is 07h (Reset).

Command Code Data from the coin selector

STATUS 79h 30 byte Z1 to Z30

Z1 [reserved]

Z2 - Z3 country code

Z4 scaling factor

Z5 decimal place

Z6 number of sorting shafts (upper nibble)

shaft of main cash box (lower nibble)

Z7 - Z14 channel – shaft assignment

in one nibble the number of a coin channel

beginning with the shaft number of type 0; in the

upper nibble beginning with Z7

Z15 - Z30 values of coins, beginning with type 0 in Z15

Command Code Modifier Data from the coin selector

Master – Slave assignment

7Fh 23h 8 Bytes Z1 to Z8

Z1 – Z8 Master – Slave assignment, coded in one nibble. Beginning

with the master for channel 17 (slave 1) in the upper nibble of

Z1 to the master for channel 32 (slave 16) in the botton nibble

of Z8.

This command is available on all coin selectors with microprocessor version

wh789v3 (January 2001) onwards

Command Code Data from the Coin Selector

POLL 7Bh 1 byte

When a response is given it is important whether the coin selector is operating in

ordinary or in extended MDB protocol.

• ordinary multi drop bus protocol

00h no result (ACK)

07h reset

8nh type n

90h coin return button pressed

91h subsequent coin in measuring system

92h coin jamming 1

93h coin does not match parameter set

94h multi drop blocking

95h coin jamming 2

96h coin blocking

97h coin jamming 3

98h coin jamming 4

99h coin jamming 5

9Ah rim detection error

9Bh lead detection

9Ch coin following to closely in TCAP1

9Dh coin-on-a-thread detection

9Eh sorting error

9Fh coin selector busy

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Comments to this Manuals

No comments

Electrolux EMP-800 Service Manual Page 31

Comments to this Manuals

Related products and manuals for Split-system air conditioners Electrolux EMP-800