Electrolux EDB8590 User Manual download pdf (Page 25)

g

25

materials used. It is safe, not detri-

mental to the performance of the

steam iron, and will not reoccur.

Filling the steam iron with

water

1

Before filling the steam iron with

water ensure that the plug is

removed from the power outlet.

The steam iron can be filled with

water while it is hot.

0 Turn the steam selector (Fig. 1/E4)

to the Dry setting ( ).

0 Place the steam iron on its heel

and open the filling aperture cover

(Fig.1/D).

0 Using the beaker provided, slowly

pour water into the filling aperture

until the maximum water level (Fig.

1/B) is reached. Do not exceed the

maximum water level indicator.

0 Push the filling aperture cover

firmly to close.

3

It is safe to use tap water in your

steam iron. The anti-calc cartridge

removes minerals from the water,

preventing scale build-up. How-

ever, in extremely hard water areas

we recommend the use of distilled

or demineralised water.

1

Do not fill the steam iron with fab-

ric conditioner, starches or other

solutions as these will damage the

steam mechanism. Do not use

contaminated water.

Using your steam iron

0 Plug the power cable into a

220-240 V power outlet.

The LCD screen (Fig. 1/H) and the

orange temperature control light

(Fig. 1/E6, located between the

temperature +/- buttons) will illumi-

nate to indicate that the steam iron

is switched on and heating.

0 Use the temperature +/- buttons

(Fig. 1/E1) to select the desired

temperature setting, as displayed

on the LCD (see Fig. 3).

The bars on the LCD will flash as

the steam iron heats up to the sel-

ected temperature setting. As each

incremental temperature is rea-

ched, the bars will display solidly.

The actual temperature in degrees

Celsius will also be displayed on

the LCD, in increments of 5

degrees.

Once the steam iron has reached

the selected temperature, the

green temperature control light

(Fig. 1/E6) will illuminate to indicate

that the steam iron is ready to use.

0 Select the desired steam output on

the steam selector (Fig. 1/E4) or

turn the steam selector to the Dry

setting ( ) to iron without steam.

3

When steam ironing, ensure that

the tank is at least ¼ full of water.

When changing from a high tem-

perature to a lower temperature,

the red temperature control light

(Fig. 1/E6) will illuminate and the

LCD will flash indicating that the

steam iron is cooling down.

0 To reduce the cooling period, turn

the steam selector (Fig. 1/E4) to

any position on the steam band

and press the steam jet button

(Fig. 1/E5).

Once the steam iron has reached

the selected temperature, the

green temperature control light

(Fig. 1/E6) will illuminate and the

bars on the LCD will display solidly,

indicating that the steam iron is

ready to use.

3

The steam iron’s twin element con-

struction allows you to iron with

maximum steam, even on one dot

temperature setting

• (synth)

.

Using the spray mist

The spray mist can be used when

steam or dry ironing to pre-

dampen hard to iron fabrics.

822 949 431_EDB8590-EX.book Seite 25 Dienstag, 12. Mai 2009 10:47 22

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 131 132

Comments to this Manuals

No comments