Electrolux EDC78550W User Manual download pdf (Page 10)

The programme can no longer be

changed directly once the programme

has started. If nevertheless there is an

attempt to change the programme on

the programme knob, the programme

progress display and the maintenance

indicators flash. If an option button (ex-

cluding the Buzzer (Buzzer) button) is

pressed,

appears on the display.

The drying programme is not however

affected by this (laundry protection).

Putting in extra items or taking items

out before end of programme

1. Open loading door.

Warning! Laundry and drum can

become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audi-

bly lock.

4. Press the Start/Pause button to contin-

ue the drying cycle.

Drying cycle complete / removing

laundry

Once the drying cycle is complete, the dis-

play shows the anti-crease icon and flash-

ing

as well as warning lamps:

filter and full tank . If the Buzzer (Buz-

zer) button has been pressed, an acoustic

signal sounds intermittently for about one mi-

nute.

The drying cycles (except from the

Wool programme) are automatically fol-

lowed by an anti-crease phase which

lasts around 30 minutes. The drum ro-

tates at intervals during this phase. This

keeps the laundry loose and free of crea-

ses. The laundry can be removed at

any time during the anti-crease phase.

(The laundry should be taken out to-

wards the end of the anti-crease phase

at the latest to prevent creases from

forming.)

1. Open door.

2. Before removing the laundry, remove

fluff from the micro-fine filter. It is best to

use a damp hand for this purpose. (See

“Maintenance and cleaning” chapter.)

3. Remove laundry.

4.

Turn the programme selector to

off .

Important! After each drying cycle:

- Clean the micro-fine filter and fine filter

- Drain the condensed water container

(See chapter “Maintenance and clean-

ing ”.)

5. Close the door.

CLEANING AND MAINTENANCE

Cleaning lint filters

To ensure that the appliance works perfect-

ly, the lint filters in the door and in front of

the drum must be cleaned after every dry-

ing cycle.

Caution! Important. Never operate the

dryer without the lint filter or with a

damaged or blocked lint filter.

1. Open loading door

2. Use a damp hand to clean the micro-

fine filter, which is built into the lower

part of the loading aperture.

3. After a period of time, a patina due to de-

tergent residue on laundry forms on the

filters. When this occurs, clean the filters

with warm water using a brush. Remove

the filter from the door pulling it out. It

can be positioned with the tooth facing

10 electrolux

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments