Electrolux ELU EDI97170W 7K/B - User Manual download pdf (Page 13)

If the water tank indicator lights up when

you select an Iron Aid programme, the pro-

gramme cannot be started. You will need to

fill the water tank first (see section on ‘Clean-

ing and maintenance,filling water tank’.)

It is normal for the appliance to make

noises during an Iron Aid or drying pro-

gramme if garments with hard parts,

such as metal buttons, are put in the

drum.

Changing a programme

To change a programme which has been se-

lected by mistake once the programme has

started, first turn the programme selector to

O OFF and then reset the programme.

The programme can no longer be

changed directly once the programme

has started. If you nevertheless attempt

to change the programme with the pro-

gramme knob or an additional function

button (except the BUZZER button), the

START/PAUSE button and

will

flash in the display. The drying pro-

gramme is not however affected by this.

Putting in extra items or taking items out be-

fore end of programme

1. Open door.

2. Load or remove laundry items.

3. Close door securely.

4. Press the START/PAUSE button to con-

tinue the drying cycle.

Iron Aid programme complete /

removing laundry

After the Iron Aid phase has ended,

is illuminated and the icon AN-

TICREASE appears in the display. If the

BUZZER has been activated, an audible sig-

nal sounds at regular intervals.

The Iron Aid programme is automatically

followed by an anti-crease phase, in-

cluding brief steam phases, which lasts

around 90 minutes.

The drum rotates during the anti-crease

phase. This keeps the laundry loose and free

of creases. It can be removed at any point

during the anti-crease phase, except during

steam phases (look for steam animation in

the display!). Laundry should be removed as

quickly as possible.

1. Open the loading door to remove the

laundry.

2. Before removing the laundry, remove fluff

from the micro-fine filter. It is best to use

a damp hand for this purpose. (See

“Cleaning and maintenance” section.)

3. Remove laundry one garment at a time.

4. Turn the programme knob to O OFF.

Important! After each drying cycle

– Clean the micro-fine filter and fine filter

– Drain the condensed water container

(See section “Cleaning and mainte-

nance”.)

5. Close door.

Caution! To retain the effects of the Iron

Aid treatment, clothes must be removed

one garment at a time during the anti-

crease phase and hung immediately on

a clothes hanger to dry (for at least 5-15

mins, depending on fabric and selected

steam level). Do up the buttons and tug

the garment into shape, paying particu-

lar attention to cuffs and seams.

Drying

Overview of drying programmes

Programmes

max. load

(weight when dry)

Additional

functions /

options

Application/properties

Care symbols

BUZZER

DELICATE

DRYNESS

TIME

COTTON

electrolux 13

1 ... 12 13 14 ... 32

Comments to this Manuals

No comments