Electrolux ELU EDI97170W 7K/B - User Manual download pdf (Page 21)

After a IronAid pro-

gramme, garments are

not sufficiently smooth.

Wrong programme selected (e.g.

SYNTHETICS instead of

COTTON).

Note the composition of the fabric.

Too low a LOAD level set. Set a higher LOAD level.

Too many garments in machine, or

garments that are too different.

Load the machine with fewer gar-

ments, or only similar ones.

Clothes are not removed until the

anti-crease phase is finished.

Remove clothes quickly one at a

time from the machine as soon as

possible after the start of the anti-

crease phase.

Garments not hung on clothes

hangers and/or not tugged into

shape.

Hang garments on clothes hang-

ers, do up buttons and tug gar-

ments into shape.

Multi-layered garments tend to lose

their shape.

Reshape multi-layered garments by

ironing after they come out of the

machine.

After a IronAid pro-

gramme, there are no

creases left in the gar-

ments.

The IronAid programme has the ef-

fect of smoothing garments.

Iron creases in again after the Iron-

Aid programme.

Drying results unsatisfac-

tory.

Wrong programme selected.

Select a different programme the

next time you dry (see “Programme

overview” chapter).

Lint filters clogged. Clean lint filters.

Fluff filter clogged. Clean fluff filter.

Heat exchanger clogged with lint. Clean heat exchanger.

Overloading of laundry.

Observe recommended loading

volumes.

Ventilation slots in base area cov-

ered up.

Uncover ventilation slots in base

area.

Residue on inside surface of drum

or drum ribs.

Clean inside surface of drum and

drum ribs.

Make an adjustment using the

DRYNESS function (see chap-

ter ”Drying”)

Conductance of water at installa-

tion site differs from standard set-

ting of machine.

Re-programme standard setting for

degree of drying (see ‘Program-

ming options’ chapter).

When a button is pressed

- no reaction of the ma-

chine.

Drying protection. After the start of

the programme, the option can no

longer be set.

Turn the programme knob to OFF.

Set the programme again.

Drum light does not work.

Programme selector in OFF posi-

tion.

Turn programme selector to any

programme.

Defective light bulb.

Replace light bulb (see next sec-

tion).

Displayed programme

time changes erratically or

stays unchanged for a

long time.

Programme time is corrected auto-

matically depending on type and

volume of laundry and level of

dampness.

Automatic process; this is not a

machine fault.

electrolux 21

1 ... 20 21 22 ... 32

Comments to this Manuals

No comments