Electrolux EWW1697SWD User Manual download pdf (Page 23)

To have a good drying the

appliance does not let you

set a too low spin speed for

the items to be washed and

dried.

2. Press to start the programme.

In the display the indicator of the set

dryness level stays on.

The door locked indicator goes on.

The display shows regularly a new time

value.

The last minutes of the

drying cycle the appliance

performs the anti-crease and

the cooling phases.

12.3 Washing & Timed Drying

To have a good drying the appliance

does not let you set a too low spin speed

for the items to be washed and dried.

1. Press to set the drying time value.

The display shows 10 minutes.

The indicator

comes on in the display.

The display shows the set drying value

time. for example: . After some

seconds the display shows the final time

value , that is the total duration of

the washing and drying cycles (washing

+ drying + anti-crease + cooling phases).

If you set only 10 minutes of

drying after washing, the

appliance calculates also the

duration of the anti-crease

and the cooling phases.

2. Press to start the programme.

In the display the indicator comes

on. The door is locked. The display

shows regularly a new time value.

12.4 End of the programme

The appliance stops automatically. The

acoustic signals operate (if they are

active).

For more information see "At the end of

the drying programme " of the previous

chapter.

1. Remove the laundry from the

appliance.

Make sure that the drum is empty.

2. Keep the door ajar to prevent mildew

and odours.

12.5 Fluff in the fabrics

During the washing and/or drying phase,

some types of fabric, (sponge, wool,

sweatshirt) could release fluff.

The released fluff could stick to the

fabrics during the next cycle.

To prevent the fluff in your laundry, we

recommend that you:

• Do not wash dark fabrics after you

have washed and dried light coloured

fabrics (new sponge, wool,

sweatshirt ) and the contrary.

• Line dry this type of fabrics at open air

when they are washed the first time.

• Clean the drain filter.

• After the drying phase, clean the

empty drum, the gasket and the door

with a wet cloth.

12.6 How to remove the fluff in

the garments

To remove the fluff inside the drum, set a

special programme:

1. Empty the drum.

2. Clean the drum, the gasket and the

door with a wet cloth.

3. Set the rinse programme.

4. Press at the same time and to

activate the cleaning function until

the display shows CLE.

5. Press

to start the programme.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments