Electrolux TE1120 User Manual download pdf (Page 14)

9.4 Auto Off function

To decrease the energy consumption, the

Auto Off function turns the appliance off

automatically:

• if the Start/Pause touch button

is not touched within 5 minutes.

• 5 minutes after a cycle ends.

Push the

ON/OFF button to turn on the

appliance.

If the appliance is on, some indications

appear on the display.

9.5 Setting a programme

Use the programme dial to set the

programme.

The time to the programme end comes

into the view on the display.

9.6 Options

Together with the programme you can set

1 or more special options.

To activate or deactivate an option touch

the relevant button or a two button

combination.

its symbol appears on the display or the

led above the corresponding button lights

up.

9.7 Starting a program

To start the program:

Touch the Start/Pause button.

The appliance starts and the LED above

the button stops flashing and stays on.

9.8 Program change

To change a program:

1. Push the ON/OFF button to turn

the appliance off.

2. Push the ON/OFF button again to

turn on the appliance.

3. Set a new program.

9.9 Programme end

Clean the filter and drain the

water container after each

drying cycle. (See chapter

CARE AND CLEANING.)

If the drying cycle is completed, the

symbol flashes on the display and the

acoustic signal sounds intermittently for 1

minute.

If you do not turn off the

appliance, the crease guard

phase starts. Laundry can be

removed during this phase.

To remove the laundry:

1. Push the ON/OFF button for 2

seconds to turn off the appliance.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments