Electrolux EHT311X User Manual download pdf (Page 8)

8

Burner cover/burner ring

Together with the burner ring the burner

cover forms a space where the final

mixture of gas and air takes place in

order to make the gas burn correctly.

Please note: It is consequently very

important that the burner cover/ring is

placed correctly on the burner. The

burner ring has been provided with

holes for the ignition electrode, and the

thermo sensor.

If the burner cover/ring are wrongly

placed the burner will operate

incorrectly, and the burners may be

damaged within at short space of time.

Ignition electrode (A)

The burner has been provided with an

ignition electrode. As long as the

operating knob is depressed, the

automatic ignition will ensure that a

spark is emitted between the ignition

electrode and the burner cover.

Thermo Sensor (B)

The hob unit features fully-secured gas

taps (thermo-fuse)

In case the flame goes out, the thermo

sensor automatically prevents gas

admission after a few seconds (max. 90

seconds).

Note: Gas admission is always allowed

while the operation button is pressed -

See start-up procedure

Burner Main nozzle

Burner ring Burner cover

Correct

Wrong

Burner ring Burner cap

Ignition electrode (A) T hermo Sensor (B)

13

If is not necessary to attach the

reinforcement beam to the table

surface, as it is held in place by a

specially designed moulding, which is

incorporated in the hob unit´s flanges.

The unit´s externally

measured length

145 mm:

Cooker hood

290 mm:

Two-burner standard electric hob

Two-burner ceramic-top electric hob

Two-burner gas hob

Grill

Wok

580 mm:

Four-burner ceramic-top electric hob

Four-burner gas hob

Installation of a single unit

When mounting a single unit, be it a

half or full size unit, in a table top

which is thicker than 30 mm, it is

necessary to make a special notch in

both sides of the cut-out hole, as

shown in the adjacent drawing.

The purpose of these notches is to

create space for the electrical cables.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments