Electrolux EW1265F User Manual download pdf (Page 12)

12 DISPLAY

The display shows the following information:

Cancelling - Duration of the programme -

Delayed start - Incorrect option selection - Alarm

code.

If a programme has been cancelled - programme

selector dial on position O - three flashing dashes

appear on the display.

Now you can select a new programme.

After selecting a programme, the duration is

displayed in hours and minutes ( for example 2.05).

The duration is calculated automatically on the basis of

the maximum recommended load for each type of fabric.

After the programme has started, the time remaining

is updated every 10 minutes and every 5 minutes

during the last 20 minutes.

When the programme has finished a flashing zero

is displayed.

If you have selected the Anti-crease option , the

zero will not flash.

2.05

Duration of the selected

programme

---

Cancelling

The selected delay (24 hours max) set by means of

the relevant button appears on the display for 4

seconds, then the duration of the previously selected

programme is displayed.

The countdown is updated every hour.

If an option which is not compatible with the set wash

programme is selected, the message Err is

displayed.

In the event of operating problems, some alarm

codes can be displayed, for example E20 (see

paragraph “Something not working”).

E20

Alarm codes

Incorrect option selection

Delayed start

1 ... 11 12 13 ... 26

No comments

Electrolux EW1265F User Manual Page 12