Electrolux EW1265F User Manual download pdf (Page 13)

ENGLISH

13 START/PAUSE button

This button has three functions:

Start - Pause - Draining of water.

After having selected the required programme, press

this button to start the machine; the corresponding

pilot light stops flashing.

If you have selected the delayed start, the machine

begins its countdown. The duration of the

programme or the delay appears on the display.

To interrupt a programme which is running, depress

the Start/Pause button: the corresponding pilot light

starts start to flash.

To restart the programme from the point at which it

was interrupted, press the START/PAUSE button

again.

By depressing the Start/Pause button

• The water of programme “A” (Soak) is emptied out

• The water of the last rinse on programmes with

Anti-crease option is emptied out and the

laundry is spun.

14 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

After the machine has started, only the running

phase pilot light stays on. When the programme has

finished, the End pilot light comes on.

Draining of water

Pause

Start

The ALARM pilot light flashes in the event of

operating problems.

At the same time one of the following lights starts to

flash and an alarm code appears on the display.

E10 + = the machine does not fill

E20 + = the machine does not empty

E40 + = the door has not been closed

To eliminate the problem, see paragraph “Something

not working”.

Functions

Pilot lights

Depending on the programme, different functions

can be combined.

When the relevant buttons are pressed, the

corresponding pilot lights come on.

When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the pilot light

flashes for about 2 seconds and the message Err is

displayed.

End of programme

When the door locked light has gone out, the door

can be opened. The light (END) on the

programme progress display illuminates.

A flashing zero appears on the display.

Switch the machine off and remove the laundry.

Turn the programme selector dial to O.

Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme.

Start it by depressing the START/PAUSE button.

Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running, the corresponding light

starts to flash.

Prewash

Main wash

Rinses

Stop with water in the tub

Drain

Spin

Alarm

End

1 ... 12 13 14 ... 26

Comments to this Manuals

No comments

Electrolux EW1265F User Manual Page 13

Comments to this Manuals

Related products and manuals for Washing machines Electrolux EW1265F