Electrolux EWF1074 User Manual download pdf (Page 11)

use electrolux 13

After you have closed the door, press the

Start/Pause button again. The Delay

Start cannot be selected with the

DRAIN programme.

If an option which is not compatible with

the set wash programme is selected,

the message is displayed for about

2 seconds and the integrated red

Start/Pause light start flashing.

In the event of operating problems,

some alarm codes can be displayed, for

example E20 (see paragraph “Something

not working”).

When the programme has finished a

flashing zero is displayed.

When the door has not been closed a

flashing E40 is displayed.

The display shows the following

information:

After selecting a programme, the

duration is displayed in hours and

minutes (for example 2.05).

The duration is calculated automatically on

the basis of the maximum recommended

load for each type of fabric.

After the programme has started, the

time remaining is updated every minute.

The selected delay (20 hours max) set

by means of the relevant button appears

on the display for about 3 seconds, then

the duration of the previously selected

programme is displayed.

The delay time value decreases by one

unit every hour and then, when 1 hours

remain, the time decreases every minute.

Duration of the selected programme

Display

Delayed start

Incorrect option selection

Alarm codes

End of programme

Door open

EN

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments