EWF 127410 X... ...EN WASHING MACHINE USER MANUAL
SELECT THE REQUIRED PROGRAMMEBY TURNING THE PROGRAMMESELECTOR DIAL (1)Turn the programme selector dial to the re-quired programme. The washing machine
START THE PROGRAMME BYPRESSING BUTTON 8To start the selected programme, press thebutton 8, the green pilot light of the button8 stops blinking.To inte
AT THE END OF THE PROGRAMMEThe machine stops automatically. Threeblinking 0.00 appear on the display and thepilot light of button 8 goes off. Someacou
acetic acid; treat any residual marks onwhite fabrics with bleach and then rinsethoroughly.Tar stains: first treat with stain remover,methylated spiri
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment SYNTHETICS -
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment SOAK - REMOJ
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment + ECO COTT
WOOLMARK CERTIFICATEThe wool wash cycle of this machine hasbeen approved by The Woolmark Companyfor the washing of machine washable woolproducts provi
MAINTENANCE WASHWith the use of low temperature washes itis possible to get a build up of residues in-side the drum.We recommend that a maintenance wa
DRAIN PUMPRegularly examine the drain pump andmake sure that it is clean.Clean the pump regularly and/or if:• The appliance does not drain the water.•
Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Safety instructions 3Product description
10. Make sure that you tighten correctly thefilter to prevent leakages.2111. Close the drain pump door.Warning!Never remove the pump cover during awas
3. unscrew the water inlet hose from thetap;4. put the two ends of the inlet hose in acontainer and let the water flow out ofthe hose.5. empty the dra
Problem Possible cause/SolutionThe machine does notempty and/or does notspin:The drain hose is squashed or kinked. • Check the drain hose connection.T
Problem Possible cause/SolutionThe machine makes an un-usual noise:The machine is fitted with a type of motor which makes an unusualnoise compared wit
2. Remove the power supply cable andthe draining hose from the hose holderson the rear of the appliance.3. Unscrew the three bolts.4. Slide out the re
the hose from your previous machine toconnect to the water supply.This appliance must be connectedto a cold water supply.1. Connect the hose with the
ENVIRONMENT CONCERNSThe symbol on the product or on itspackaging indicates that this product maynot be treated as household waste. Insteadit should
electrolux 27
www.electrolux.com/shop 132943271-A-512012
• Obey the maximum load volume of 7 kg (refer to the “Pro-gramme chart” chapter).• If the supply cord is damaged, it must be replaced by themanufactur
• Before you connect the appliance to newpipes or pipes not used for a long time,let the water flow until it is clean.• The first time you use the app
DETERGENT DISPENSER DRAWER Compartment for detergent used forprewash and soak phase or for stain re-mover used during the stain action phase (ifavaila
Follow the instructions supplied with the kit.CONTROL PANELBelow is a picture of the control panel. It shows the programme selector dial as well asthe
= Cold wash = Delay Start= Spin reduction = Child Safety Lock= Night Cycle = Start/ Pause= Rinse Hold = Door Lock= Prewash = Time Manager buttons (Tim
DISPLAY7.4 7.5 7.17.3 7.2The display shows the following informa-tion:7.1:•Duration of the selected programmeAfter selecting a programme, the duration
PERSONALISATIONACOUSTIC SIGNALSThe machine is provided with an acousticdevice, which sounds in the following ca-ses:• at the end of the cycle• if ther
Comments to this Manuals