Electrolux EWG127410W User Manual

EWG 127410 WEN Washing Machine User Manual

ProgrammeTemperature rangeMaximumloadReducedload1)Maximumspin speedProgramme description(Type of load and soil level)Spin7 kg1200 rpmTo spin the laund

ProgrammeTemperature rangeMaximumloadReducedload1)Maximumspin speedProgramme description(Type of load and soil level)90°C - 40°C7 kg1200 rpmWhite cott

Programme 1) Available only if the last step is lower than 700 rpm.2) Set the spin speed. Make sure it is suitable for the type of fabric

7. OPTIONS7.1 Programme knobThis knob allows you to select aprogramme, to reset a programme and/orto switch the appliance on/off .The knob can be turn

WashingcycleSoil levelType of fab‐ricsIntensiveHeavy soileditemsNormalNormal soileditemsDailyDaily soileditemsLightSlightly soileditemsQuickVery sli

9. BEFORE FIRST USE1. Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.2. Put a small quantity of de

• The display shows the defaultlevel of Time Manager, theprogramme duration and theprogramme phases indicators ofthe selected programme.• The indicato

2. Now, you can set a new washingprogramme and the availableoptions.Before starting the newprogramme the appliancecould drain the water. In thiscase,

• Obey the washing instructions thatare on the laundry care labels.• Do not wash white and coloured itemstogether.• Some coloured items can discolourw

12. CARE AND CLEANINGWARNING!Refer to Safety chapters.12.1 External cleaningClean the appliance with soap and warmwater only. Fully dry all the surfac

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

3. 4.MAX12.6 Cleaning the drain filterThe pump should be inspected regularlyand particularly if:• The appliance does not empty and/orspin.• The applia

4. Release the emergency emptying hose,place it in the container and remove its capcover.125. When no more water comes out, unscrewthe filter cover by

12.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°12.8 Frost precautionsIf the appliance is installed in an areawhere the temperature

5. When the bowl is full, put the capback on the emergency hose.6. Empty the bowl. Repeat theprocedure until water stops flowingout.7. Clean the pump

Problem Possible cause/solutionThe appliance does notfill with water properly.Make sure that the water tap is open.Make sure that the pressure of the

Problem Possible cause/solutionYou cannot open theappliance door.Make sure that the washing programme is finished.Set the drain or the spin programme

Remove the cardboard top. Remove thepolystyrene packaging materials.Remove the internal film.Open the door. Remove the polystyrenepiece from the door

12Remove the polystyrene protection from thebottom. Pull up the appliance in verticalposition.Remove the polystyrene block fitted on thedoor seal (if

Put the plastic caps in the holes. You can findthese caps in the user manual bag.We recommend that you keep the packaging and the transit bolts for an

14.3 The inlet hose20O20O45O45O• Connect the hose to the back appliance.Turn the inlet hose only left or right.• Loose the ring nut to set it in the c

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to the water tap or the wall.To a stand

To a wall-pipe• Directly to a built-in drain pipe in the roomwall and tighten it with a clip.You can extend the drain hose to maximum 400 cm. Contact

16-22 mm22±1,5 mm416mmX595-598 mmØ 35 mm14 mmDoorThe dimensions of the door should be:• width 595 - 598 mm• thickness 16-22 mm• the height X depends o

ABCEDWARNING!Do not remove the screw B.If the door has to be opened from left to right,invert the position of the plates E, the magnet D and the plate

www.electrolux.com34

ENGLISH 35

www.electrolux.com/shop132938701-A-382016

• The ventilation opening in the base (if applicable) mustnot be covered by a carpet, mat, or any floor covering.• The appliance must be connected to

cable. Should the mains cable need tobe replaced, this must be carried outby our Authorised Service Centre.• Connect the mains plug to the mainssocket

3. PRODUCT DESCRIPTION3.1 Appliance overview7 8 9101 234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump filter6Feet for level

4. CONTROL PANEL4.1 Control panel description120090070090°60°40°30°Temp. Spin Easy IronExtra Rinse Delay StartStart/PauseCottons+Prewash+PrewashSynthe

A Soil degree indicators:IntensiveNormalDailyLightQuickQuickRefreshSuper RefreshWhen you select a programme, the display shows the indicator of the so

D Washing programme phase indicators:WashRinsesDrainSpinBy selecting the wash programme, the washing programme indicators corre‐sponding to the variou