Electrolux EWT1320 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
33
Using the machine
Before using your appliance for the first time, we
recommend that you perform a preliminary wash, with-
out laundry, to clean the drum and tub if necessary:
- Pour an amount of detergent into the “wash” compart-
ment.
- Select a 90°C cotton programme.
- Press the start/pause button "
": the wash cycle
starts.
1. Loading the laundry
lift the lid of the machine,
open the drum by pressing on button A : the two flaps
are opened automatically,
load the laundry, close the drum and the lid of the
appliance.
Warning: before closing the lid of your appliance,
ensure that the drum door is properly closed:
the two flaps are locked,
the locking button A is out.
An electronic system allows the drum to be in the high
position when the cycle is finished. This system allows
for easier loading and unloading of the laundry. If an
unbalanced weight alters the functionning, turn the drum
by hand.
2. Measuring the detergent
Pour the amount of powdered detergent into the dispens-
ers
( ) and ( ) or a scale-remover into the dispenser
( ) if applicable.
If you are using a liquid detergent, refer to the “Choosing
a detergent” section in the washing guide.
3. Additives
If required, pour fabric softener into the softener dis-
penser
( ) without exceeding the maximum level.
4. Selecting the desired programme
Turn the programme selector to the chosen programme.
The lights corresponding to the phases included in the
programme illuminate.
If the programme selector is turned when the appliance
is performing a wash cycle, the code “Err” appears in the
display window and flashes for 4 seconds. The pro-
gramme will be carried out and will ignore the new
position of the selector. The timer for the current cycle
reappears in the display window.
The stop position "AUS/ARRÊT" of the programme
selector is used to cancel the programme and to restart
the appliance in the event of an error.
5. Selecting the temperature
Select the temperature which corresponds to the chosen
programme, using the instructions given on the pro-
gramme chart.
6. Selecting the spin speed or the
no spin option "
"
When selecting the programme, or in pause mode, the
light corresponding to the maximum spin speed
illuminates. You can adjust the spin speed which corres-
ponds to the type of laundry and the degree of dampness
required at the end of the wash depending on your drying
possibilities. You can also choose the no spin position
"
" immediately after the final rinse.
A
Page view 9
1 ... 9 10 11 ... 25

Comments to this Manuals

No comments