Electrolux EWW1686HDW User Manual download pdf (Page 15)

• Position A for powder detergent (factory setting).

• Position B for liquid detergent.

When you use the liquid detergent:

– Do not use gelatinous or thick liquid detergents.

– Do not put more liquid then the maximum level.

– Do not set the prewash phase.

– Do not set the delay start.

9.3 Activating the appliance

Press the Aan/Uit button to activate or

deactivate the appliance. A tune sounds

when the appliance is activated.

9.4 Setting a programme

1.

Turn the programme knob and set

the programme:

– The related programme indicator

comes on.

– The indicator of the

flashes.

– The display shows the level of the

Time Manager, the programme du-

ration and the indicators of the pro-

gramme phases

2.

If necessary, change the temperature,

the spin speed, the cycle duration, or

add available options. When you acti-

vate an option, the indicator of the set

option comes on.

If you set something incorrect, the

display shows the message Err.

9.5 Starting a programme

without delay start

Press :

•The indicator

stops to flash and

stays on.

•

The indicator

starts to flash on the

display.

• The programme starts, the door is

locked and the display shows the indi-

cator

.

• The drain pump can operate for a short

time when the appliance fills water.

After approximately 15 minutes

from the start of the programme:

• The appliance adjusts automati-

cally the programme duration

agree with the laundry load.

• The display shows the new val-

ue.

9.6 Starting a programme with

delay start

•

Press

again and again until the dis-

play shows the delay you want to set.

The related indicator comes on the dis-

play.

• Press

:

– The appliance starts the countdown.

– When the countdown is completed,

the programme starts automatically.

You can cancel or change the set

of the delay start before you press

.

To cancel the delay start:

1.

Press to set the appliance to

pause.

2.

Press until the display shows ’.

Press

again to start the pro-

gramme immediately.

9.7 Interrupting a programme

and changing the options

You can change only some options be-

fore they operate.

1.

Press . The indicator flashes.

2.

Change the options.

3.

Press again. The programme con-

tinues.

ENGLISH 15

1 ... 14 15 16 ... 32

Comments to this Manuals

No comments