Electrolux GA55IEEV User Manual download pdf (Page 79)

• The number of the washing programme.

• Remaining time to the end of the pro-

gramme.

• Activation/deactivation of the rinse aid dis-

penser (only with multitab function on).

• End of the washing programme. The dis-

play shows a zero.

• Number of hours in delay start.

• Fault codes.

• Activation/deactivation of the audible sig-

nals.

Function buttons

Use the function buttons for these opera-

tions:

• To set the water softener. Refer to the

chapter 'Setting the water softener'.

• To deactivate/activate the rinse aid dis-

penser, when multitab function is active.

Refer to the chapter 'Multitab function'.

• To cancel the washing programme or the

delay start in progress.

• To deactivate/activate the audible signals.

Setting mode

The appliance must be in setting mode for

these operations:

• To set a washing programme.

• To set the water softener level.

• To deactivate/activate the rinse aid dis-

penser.

• To deactivate/activate the audible signals.

Press the on/off button. The appliance is in

setting mode when:

– The programme button indicator light

comes on,

– the digital display shows 2 horizontal bars.

Press the on/off button. The appliance is not

in setting mode when:

– The programme button indicator light

comes on,

– the digital display shows the time duration

of a washing programme.

– A washing programme is set. It is neces-

sary to cancel the programme to go back

to the setting mode. Refer to the chapter

'Setting and starting a washing pro-

gramme'.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• During the setting of the level of the water

softener.

• When the appliance has a malfunction.

The activation of the audible signals is set at

the factory.

Do these steps to deactivate the audible sig-

nals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold function buttons B and C

until the indicator lights of function but-

tons A, B and C start to flash.

4. Release function buttons A and B.

5. Press the function button C.

– Indicator lights for function buttons A

and B go off.

– Indicator light for function button C

flashes.

– The digital display shows the setting.

Audible signals deactiva-

ted

Audible signals activated

The audible signals are activated.

6. Press the function button C again.

– The digital display shows the new set-

ting.

The audible signals are deactivated.

7. Switch off the appliance to save the op-

eration.

Do these steps to activate the audible sig-

nals:

1. Do the above procedure until the digital

display shows necessary setting.

Use of the appliance

Refer to the following instructions for each

step of procedure:

1. Make a check if the water softener level

is correct for the water hardness in your

area. If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish-

washer.

electrolux 79

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 99 100

Comments to this Manuals

No comments