Electrolux GA55IEEV User Manual download pdf (Page 80)

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use combi detergent tablets ('3 in

1', '4 in 1', '5 in 1', etc.), refer to the

chapter 'Multitab function'.

Setting the water softener

The water softener removes minerals and

salts from the water supply. Minerals and

salts can have bad effect on the operation of

the appliance.

Water hardness is measured in equivalent

scales:

• German degrees (dH°).

• French degrees (°TH).

• mmol/l (millimol per litre - international unit

for the hardness of water).

•Clarke.

Adjust the water softener to the water hard-

ness in your area. If necessary, contact your

local water authority.

Water hardness

Water hardness

setting

°dH °TH mmol/l Clarke

51 - 70 91 - 125 9,1 - 12,5 64 - 88 10

43 - 50 76 - 90 7,6 - 9,0 53 - 63 9

37 - 42 65 - 75 6,5 - 7,5 46 - 52 8

29 - 36 51 - 64 5,1 - 6,4 36 - 45 7

23 - 28 40 - 50 4,0 - 5,0 28 - 35 6

19 - 22 33 - 39 3,3 - 3,9 23 - 27 5

15 - 18 26 - 32 2,6 - 3,2 18 - 22 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 2

< 4 < 7 < 0,7 < 5

1

1)

1) No use of salt required.

Electronic adjustment

The dishwasher is factory set at lev-

el 5.

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold function buttons B and C

until the indicator lights of function but-

tons A, B and C start to flash.

4. Release function buttons B and C.

5. Press function button A.

– The indicator lights for function buttons

B and C go off.

– The indicator light for function button A

continues to flash.

– The digital display shows the current

level.

– You can hear an audible signal.

Example: digital display shows

/ 5 in-

termittent audible signals = level 5.

6. Press the function button A one time to

increase the water softener level by one

step.

7. Press the on/off button to save the oper-

ation.

Use of dishwasher salt

Caution! Only use dishwashers salt.

Types of salt that are not applicable for

dishwashers cause damage to the water

softener.

Caution! Grains of salt and salty water

on the bottom of the appliance can

cause corrosion. Fill the appliance with

salt before you start a washing

programme to prevent corrosion.

80 electrolux

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 99 100

Comments to this Manuals

No comments