Electrolux GA60LVCN User Manual download pdf (Page 13)

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree of

soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The AUTO OFF function

This function decreases energy

consumption by deactivating automatically

the appliance when it is not operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly until the display

shows the number of the programme

you want to start. The display will

show the programme number for

approximately 3 seconds and then

show the programme duration.

• If you want to select the

MyFavourite programme, press

.

– The indicators of the options

related to the MyFavourite

programme come on.

The display will show the programme

number for approximately 3 seconds and

then show the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with delay

start

1. Set a programme.

2. Press again and again until the

display shows the delay time you want

to set (from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is possible

to increase the delay time but not to

change the selection of the programme

and options.

When the countdown is completed, the

programme starts.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments