Electrolux GA60LVCN User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Problem and alarm code Possible cause and solution
Small leak from the appli-
ance door.
The appliance is not level. Loosen or tighten the ad-
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi-
cult to close.
The appliance is not level. Loosen or tighten the ad-
justable feet (if applicable).
Parts of the tableware are protruding from the bas-
kets.
Rattling/knocking sounds
from inside the appliance.
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the cir-
cuit-beaker.
The amperage is insufficient to supply simultaneously
all the appliances in use. Check the socket amperage
and the capacity of the meter or turn off one of the ap-
pliances in use.
Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
12.1 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
Use more intensive washing programs.
If you use multi-tablets, always switch on the option
Multitab.
Poor drying results. Tableware has been left for too long inside a closed
appliance.
There is no rinse aid or the dosage of rinse aid is not
enough. Set the rinse aid dispenser to a higher level.
Plastic items may need to be towel dried.
There are whitish streaks or
bluish layers on glasses and
dishes.
The release quantity of rinse aid is too much. Adjust
the rinse aid selector to a lower position.
The quantity of detergent is too much.
There are stains and dry wa-
ter drops on glasses and
dishes.
The released quantity of rinse aid is not sufficient.
Adjust the rinse aid selector to a higher position.
The quality of the rinse aid can be the cause.
ENGLISH
19
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments