Electrolux EILFU17GS Service Manual download pdf (Page 47)

5-7

CCoommppoonneenntt TTeeaarrddoowwnn

Figure 5-14. Light Shield Removal

Figure 5-15. Light Fixture Removal

WWiirree BBaasskkeett RReemmoovvaall

The wire baskets are secured with retaining clips

to the slide assemblies. (See Figure 5-13)

To remove the wire baskets:

1. Pull wire basket out from unit interior until the

slides are fully extended.

2. Pull wire basket out from the retaining clips on

each corner of the wire basket.

WWiirree BBaasskkeett SSlliiddee RReemmoovvaall

The wire basket slides are secured with screws to

the liner sidewalls. (See Figure 5-13)

To remove the wire basket slides:

1. Remove wire basket from slide assembly.

2. Using a phillips head screwdriver, extract the

two screws securing the slides to the liner side

wall.

LLiigghhtt SShhiieelldd RReemmoovvaall

The light shield is secured with screws to the

interior cabinet ceiling. The light fixture and bulb

can be accessed without removing the light shield.

(See Figure 5-14)

To remove the light shield, use a phillips head

screwdriver and extract the three screws securing

the light shield to the interior cabinet ceiling.

LLiigghhtt FFiixxttuurree RRe

emmoovvaall

The light fixture is secured with retaining latches

into the interior cabinet ceiling behind the light

shield. (See Figure 5-15)

To remove the light fixture:

1. Remove light bulb by turning counter

clockwise.

2. Pull down on the front of the light fixture while

turning the fixture a quarter turn to release the

retaining latches.

3. Disconnect wire leads from light fixture

terminals.

Figure 5-13. Wire Basket and Slide Removal

Wire Basket

Screws

Slide

Assembly

Light Shield

Screws

Light Bulb

Light Fixture

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

Comments to this Manuals

No comments

Electrolux EILFU17GS Service Manual Page 47

Comments to this Manuals

Related products and manuals for Fridges Electrolux EILFU17GS