Electrolux ERQE41C5YLS User Manual download pdf (Page 14)

Unpacking the unit

Remove all the packing components,

including the foam base and the belts

used for fixing the accessories.

Installing your refrigerator

Locate your refrigerator in a well-

ventilated place, away from direct

sunlight and sources of heat.

Allow some space around the

refrigerator for ventilation and heat

emission.

Allow at least 300mm of space from

the top the refrigerator, 100mm of

space from the sides and 50mm of

space from the back.

Place your refrigerator on a floor that

is strong enough to support the

refrigerator when it is fully loaded and

adjust the front feet to keep the

refrigerator level. Unlevel standing of

the refrigerator will cause noise and

oscillation. Please lay a firm plate

below the refrigerator when you put

the refrigerator on the carpet, straw

mattress and PVC materials in order

to avoid off-color carpet caused by

the heat emission.

Installation

Operating your refrigerator

Static resting

To make sure of good working, let the

refrigerator stand static at least one

hour before plugging it into the wall

outlet.

Cleaning the refrigerator

Clean the inside of the refrigerator

with soft cloth.

Plug the refrigerator

Plug the refrigerator into a dedicated,

properly installed wall outlet. After the

compressor works for an hour, open

the freezer door and you will find the

temperature falls obviously and this

shows proper refrigeration.

Put the food in the refrigerator after

the unit fully cools down

After the refrigerator works for a

while, the unit will automatically

control its temperature according to

the setting of the user. When the unit

fully cools down, put in the food and

it will fully cools down in 2 to 3 hours.

In summer time, it takes at least 4

hours for the food to fully cool down.

(Do not open the refrigerator too

much before the unit gets cool.)

Operation

Residual current circuit breaker: If

the refrigerator is located in a moist

place, make sure to check and

guarantee the grounding and the

residual current circuit breaker both

properly work. When the refrigerator

hits the wall or the wall gets black

due to the air convection around

the compressor, remove the

refrigerator away from the wall.

The setting on the refrigerator could

cause noise or bad image to the

nearby mobile phone, fixed line,

radio and television. Remove the

refrigerator as much as possible.

Make sure of good ventilation

around the refrigerator.

ENG

ENG

25 electrolux installation operation electrolux 26

30cm

(top)

5cm

(back)

10cm

(side)

10cm

(door side)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments