Electrolux ERT16002W8 User Manual download pdf (Page 22)

– avoid open flames and sources of igni-

tion

– thoroughly ventilate the room in which

the appliance is situated

• It is dangerous to alter the specifications or

modify this product in any way. Any dam-

age to the cord may cause a short-circuit,

fire and/or electric shock.

Warning! Any electrical component

(power cord, plug, compressor) must be

replaced by a certified service agent or

qualified service personnel.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back of

the appliance. A squashed or dam-

aged power plug may overheat and

cause a fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do

not insert the power plug. There is a

risk of electric shock or fire.

6. You must not operate the appliance

without the lamp cover

7)

of interior

lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are

damp/wet, as this could cause skin abra-

sions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

Daily use

• Do not put hot pot on the plastic parts in

the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may explode.

• Appliance's manufacturers storage rec-

ommendations should be strictly adhered

to. Refer to relevant instructions.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Do not clean the appliance with metal ob-

jects.

• Regularly examine the drain in the refriger-

ator for defrosted water. If necessary,

clean the drain. If the drain is blocked, wa-

ter will collect in the bottom of the appli-

ance.

Installation

Important! For electrical connection

carefully follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if there

are damages on it. Do not connect the ap-

pliance if it is damaged. Report possible

damages immediately to the place you

bought it. In that case retain packing.

• It is advisable to wait at least four hours

before connecting the appliance to allow

the oil to flow back in the compressor.

• Adequate air circulation should be around

the appliance, lacking this leads to over-

heating. To achieve sufficient ventilation

follow the instructions relevant to installa-

tion.

• Wherever possible the back of the product

should be against a wall to avoid touching

or catching warm parts (compressor, con-

denser) to prevent possible burn.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is accessi-

ble after the installation of the appliance.

•

Connect to potable water supply only.

8)

Service

• Any electrical work required to do the serv-

icing of the appliance should be carried out

by a qualified electrician or competent per-

son.

• This product must be serviced by an au-

thorized Service Centre, and only genuine

spare parts must be used.

7) If the lamp cover is foreseen

8) If a water connection is foreseen

22 electrolux

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Comments to this Manuals

No comments