Electrolux ZKR1516 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
1. Remove the plug from
the power socket.
2. Tilt back the appliance
carefully so that the com-
pressor cannot touch the
floor.
3. Unscrew both adjusta-
ble feet.
4. Unscrew the screws of
the door bottom hinge.
Remove the hinge. Put
over the pin in the direc-
tion of the arrow.
5. Unscrew and install the
screw on the opposite
side.
6. Install the hinge on the
opposite side.
7. Screw both adjustable
feet.
8. Unscrew both screws
on the rear side.
9. Push back the top and
lift it from the fixing ele-
ments.
10. Unscrew the screws of
the door top hinge.
11. Remove the hinge.
Put over the pin in the di-
rection of the arrow. Install
the hinge on the opposite
side.
12. Tighten the hinge.
13. Put the top in position.
14. Pull it forward.
15. Screw both screws on
the rear side.
16. Remove and install
the handle
1)
on the oppo-
site side.
17. Reposition, level the
appliance, wait for at least
four hours and then con-
nect it to the power socket.
1) If foreseen
Do a final check to make sure that:
All screws are tightened.
The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments