Electrolux EDBS3340 User Manual download pdf (Page 30)

TROUBLESHOOTING

Problem Possible cause Solution

Soleplate is not heating even though

iron is turned on.

Connection problem Check main power supply cable, plug

and outlet.

Temperature control is in MIN position. Select adequate temperature.

Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”,

no 2).

Steam control is selected in non-steam

position.

Set steam control between positions of

minimum steam and maximum steam

(see “Ironing chart”).

Selected temperature is lower than that

speciﬁed to use with steam.

Increase temperature to at least

Steam jet and vertical steam jet

function does not work.

Steam jet function was used very

frequently within a short period.

Put iron on horizontal position and

wait before using steam jet function.

Iron is not hot enough. Adjust the proper temperature to

steam ironing (up to

). Put iron

in vertical position and wait until

temperature indicator light turns o.

Water leaks from the soleplate during

ironing.

The iron is not hot enough. Set the temperature dial to a

temperature

(

to maximum) suitable for steam

ironing. Put the iron on its heel and

wait until the light has gone out before

you start ironing.

Flakes and impurities come out of the

soleplate during ironing.

You have used hard water, which has

caused scale akes to develop in the

water tank.

Press and hold the steam button for

about one minute to get steam. Then

hold one more minute in order to

clean the steam generating system.

Iron an old towel, to ensure that

any residues inside the iron are not

transferred to the laundry.

Water leaks from the soleplate while

the iron is cooling down or after it has

been stored.

The iron has been put in horizontal

position while there is still water in the

water tank.

Empty the water tank and set the

steam control to position o before

storing the iron.

Brown streaks come out of the

soleplate while ironing and stain the

linen.

You have used chemical descaling

agents.

Do not use any descaling agents.

Fabric bres have accumulated in the

holes of the soleplate and are burning.

Clean the soleplate with a damp soft

cloth.

Fabrics might not be properly rinsed or

the garments are new and have not been

washed before ironing.

Please rinse the laundry properly

again.

DISPOSAL

Recycle the materials with the symbol .

Put the packaging in applicable containers to recycle it.

Help protect the environment and human health and to

recycle waste of electrical and electronic appliances.

Do not dispose appliances marked with the symbol

with the household waste. Return the product to your

local recycling facility or contact your municipal oce.

www.electrolux.com30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 111 112

Comments to this Manuals

No comments

Electrolux EDBS3340 User Manual Page 30

Comments to this Manuals

Related products and manuals for Irons Electrolux EDBS3340