Electrolux EBSL70TC.3 Service Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
- 27 -
Spares Operation 08.01 A. B. 599 51 19 69 EN
7.3 Service test
Test routines and their use
The control is equipped with several test routines which can be run partly manually or are running
automatically in the background.
Safety switch-off
The appliance is equipped with a safety switch-off which leads to an independent switch-off of the
appliance, when with different temperature settings the assigned time intervals are exceeded without any
changes of functions or temperature.
Examples: up to 250 °C 3 h
up to 230 °C 6 h
up to 120 °C 12 h
Service test
The manual test system of the control is composed of 6 test routines. To have access to these 6 test
routines, the control must be in an error mode and indicate the current error, or the time has to flash. This
will be achieved, when voltage is applied to directly. When it is necessary to have access to the test
routines during operation, the appliance must be disconnected from the mains for at least 1 0 seconds.
Basic setting
1 Time is flashing or current error is indicated.
2 Keep key minute minder and key 1 pressed simultaneously for 5 sec.
3 The display shows the routine number at the right, which can be set from 1-6 using the key minute
minder. If the routine number has been pre-selected and no entry is made within 5 sec., the control
switches to the pre-selected test routine.
4 If a test routine has been carried out, this routine can be left by actuating the OFF key.
5 Switching on a test routine, see 1.
Routine 1
1 block 048
2 block 900
3 block 210
in red
048
1
white
routine number
The code of 9 digits, which appears in 3 blocks of 3 digits one after the other, is the version number of the
appliance. This code informs about the product number of the appliance.
Example: Version 015 270 800 replace the zero as first digit by 9
315 270 800 this number must be identical with the nameplate
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Comments to this Manuals

No comments