5.4 Setting the water hardness
The table below shows the water
hardness range (dH) with the
corresponding Calcium deposit and the
quality of the water.
Water hardness Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas‐
sification
Class dH
1 0 - 7 0 - 1.3 0 - 50 Soft
2 7 - 14 1.3 - 2.5 50 - 100 Moderately
hard
3 14 - 21 2.5 - 3.8 100 - 150 Hard
4 over 21 over 3.8 over 150 Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the 4 colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water.
3. Shake the strip to remove the excess
of the water.
4. Wait 1 minute and check the water
hardness with the table below.
The colours of the reaction zones
continue to change. Do not check the
water hardness later than 1 minute
after test.
5. Set the water hardness: menu: Basic
Settings.
Test strip Water hardness
1
2
3
4
You can change the water hardness in
the menu: Basic Settings / Water
hardness.
6. QUICK GUIDE
6.1 Using the touchscreen
• To scroll the menu use a quick
gesture or drag your finger across the
display.
• The strength of the gesture
determines how fast the screen
moves.
• The scroll movement can stop by
itself or you can stop it immediately if
you touch the display.
• The chosen function turns on when
you release the finger from the
display.
• To turn on a menu function touch the
display on the selected function.
• You can change any parameter
shown on the display when you touch
it.
• To set the required function, time or
temperature you can scroll through
the list or touch the option you want to
choose.
• When you turn on a heating function
the Menu does not appear on the
display. Touch the display anywhere
and the Menu appears again.
• When the oven is turned on, and
some of the symbols disappear from
www.electrolux.com10
Comments to this Manuals