Electrolux EXP09HN1WI User Manual download pdf (Page 15)

15ENGLISH

2. During the Heating mode, you will need

to connect a drain hose to the rear of

unit as Fig.26

Additional things you should know

Now that you have mastered the operating

procedure, here are more features in your

control that you should become familiar

with.

t The “Cool” circuit has an automatic

3minute time delayed start if the unit is

turned off and on quickly. This prevents

overheating of the compressor and

possible circuit breaker tripping. The fan

will continue to run during this time.

t The control will maintain the set

temperature within 1 °C, between

t 17 °C and 30 °C (62 °F and 86 °F).

t The control is capable of displaying

temperature in degrees Fahrenheit or

degrees Celsius. To convert from one to

the other and back, press and hold the

“TEMP” Up (

) and Down ( ) buttons

together for 3 seconds.

t After a power outage, the unit will

memorize the last setting and return the

unit to the same setting once power is

restored.

Continious

drain hose

Fig. 26

7. CARE & CLEANING

Clean your air conditioner occasionally to

keep it looking new. Be sure to unplug

the unit before cleaning to prevent

shock or re hazards.

7.1 Air Filter Cleaning

t This unit has two lters, they are lter A

and B. Grasp the upper panel tab and

take off the lter A which behind the grill

of the back panel (Fig. 27). Remove the

lower lter B by loosening the screw.

Take down the air inlet grille, then

remove the air lter as shown in Fig.28.

Fig. 27

Filter A

Fig. 28

Filter B

Slide out the lter B

behind the side panel

Remove the

screw and take

the air intake

grille down

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Comments to this Manuals

No comments