Electrolux EW1280F User Manual download pdf (Page 24)

Something not working?

Problems which you can resolve yourself, before calling the After Sales Service.

During machine operation it is possible that one of the following messages appears on the display:

Problem with the water supply........“No incoming water. Check tap & hose”

Problem with water draining ..........“No drain. Check drain hose /filter”

Door open ......................................“Door not closed. Please check”

Once the problem has been eliminated, press the Start/Pause button to restart the programme. If after all

checks, the problem persists, contact your local Service Centre.

Problem

Possible cause

• The machine does not start up:

• The door is not firmly closed.(Door not closed.

Please check)

• The machine is not plugged in or there is no power

at the socket.

• The main fuse has blown.

• The Start/Pause button has not been depressed.

• The Delay Start option has been selected.

• The machine does not fill:

• The water tap is closed. (No incoming water.

Check tap & hose)

• The inlet hose is squashed or kinked. (No

incoming water. Check tap & hose)

• The filter in the inlet hose is blocked. (No

incoming water. Check tap & hose)

• The door is not properly closed. (Door not closed.

Please check)

• The machine fills then empties

immediately:

• The end of the drain hose is too low. Refer to

relevant paragraph in “water drainage” section.

• The machine does not empty and/or

does not spin:

• The drain hose is squashed or kinked.

• The RINSE HOLD option , NIGHT CYCLE or

NO SPIN «O» has been

selected.

• The drain pump is clogged. (No drain. Check

rain hose /filter)

• There is water on the floor:

• Too much detergent or unsuitable detergent

(creates too much foam) has been used.

• Check whether there are any leaks from one of the

inlet hose fittings. It is not always easy to see this

as the water runs down the hose; check to see if it

is damp.

• The drain hose is damaged.

• The cap on the emergency emptying hose has not

been replaced after cleaning the filter.

• The pump has not been fully screwed in after

cleaning.

132991980_GB.qxd 25/11/2003 13:56 Pagina 24 (Nero/Process Black pellicola)

1 2 ... 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Electrolux EW1280F User Manual Page 24

Comments to this Manuals

Related products and manuals for Washing machines Electrolux EW1280F