Electrolux EWF147110W User Manual download pdf (Page 8)

Select the required programme by

turning the programme selector dial (1)

Turn the programme selector dial to the re-

quired programme. The washing machine

will automatically select the maximum spin

value provided for the programme you have

chosen. You can change this value by

pressing the corresponding button. The

green pilot light of the button 5 starts to

flash.

The selector dial can be turned either clock-

wise or counterclockwise. Turn to position

«O» to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-

tor dial must be turned to position O, to

switch the machine off.

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 5 will blink 3 times

to indicate a wrong selection. The

machine will not perform the new

selected programme.

Reduce the spin speed by pressing

button 2

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 2 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant light

illuminates.

Select the available options by

pressing buttons 2, 3 and 4

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding pilot lights illuminate. When they

are pressed again, the pilot lights go out. If

an incorrect option is selected, the integra-

ted red pilot light of the button 5 flashes 3

times.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing

button 6

Before you start the programme, if you wish

to delay the start, press the button 6 re-

peatedly, to select the desired delay. The

relevant light illuminates.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the

button 6.

3. Press button 5:

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having

started the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 6 once, the light relevant

to the selected delay goes off

3. Press button 5 again to start the pro-

gramme.

The Delay Start can not be selected with

DRAIN programme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the de-

lay time. If you need to open the door, you

must set the machine to PAUSE (by press-

ing the button 5) and then wait a few mi-

nutes. After you have closed the door,

press the button 5 again.

Start the programme by pressing

button 5

To start the selected programme, press the

button 5, the corresponding green pilot light

stops blinking. The pilot lights 7.1 and 7.2

illuminate to indicate that the appliance

starts operating and the door is locked.

To interrupt a programme which is running,

press the button 5: the corresponding

green pilot light starts blinking.

To restart the programme from the point at

which it was interrupted, press the button 5

8 electrolux

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments