Electrolux EWW14012 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 112
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
www.electrolux.com
Press to start the program.
After a few seconds the display
shows the final time value eg: ,
that is the total duration of the
washing + detachment + drying
cycles.
The display shows the set drying
value time, eg: value.
To achieve the best drying results
the appliance will not allow you to
set spin speed lower than
minimum required.
The acoustic signal will operate.
The display will show time
remaining “ ”.
At The End Of The Drying
Program
6.4
The display will show “Cycle end” and
“Anti-crease” alternately.
-
-
-
The door lock indicator ( ) is still on.
-
The door lock indicator ( ) goes off.
-
The display will show “Cycle end” and
“Remove laundry” alternately.
If you wish to open the door during
the anti-crease phase or interrupt
it, press any button (except
On/Off).
-
The appliance will perform the anti-
crease phase for approx. 10 minutes.
After anti-crease phase finish:
-
Some drying level options are
not available for some drying
programs.
The display shows a time value based
on the default load size. If the amount
of your laundry is more or less than
the default size, the appliance will
adjust the time value automatically
during the cycle.
The display shows the door locked
indicator ‘ ’.
Press to start the program.
Press the On/Off button to turn on the
machine.
Select a drying program.
The display shows the default drying
level.
Press until the display shows the
desired dryness level. (See section
3.16)
Load the laundry, one item at a time.
Automatic Dryness Levels:
DAILY USE - DRYING7.
Make sure water tap is opened
and drain hose is in the sink or
connect to the drain pipe.
WARNING!
If you set only 15 minutes of
drying, the appliance performs
only a cooling phase.
Press to start the program.
The display shows the door locked
indicator ‘ ’.
Dry Time:
Press repeatedly to set the
drying time value. (See section 3.17)
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 111 112

Comments to this Manuals

No comments