Electrolux U31175 LU4 9QQ User Manual download pdf (Page 14)

electrolux EXP09CS1WI front/rear view 11 electrolux EXP09CS1WI installation of window kit 11

Installation in a sliding sash window

1. Connect the rain guards to the insect guard net

• Insert all three projections on each rain guard into the

holes in the insect guard net.

• Side “A” will now be uppermost, as indicated in the

diagram.

. Attach the guard combined with insect guard net to the

window panel

• Push the insect guard net rmly to ensure that its four

projections t into the holes in the window panel.

• Side “A” will now be at the top, as indicated in the

diagram, when it is installed in the window.

3. Cut the foam seal A (adhesive type) to the proper length

and attach it to the window frame

4. Install the window panel into the window frame

(A) If the inner height of the window is between 559mm and

609mm inclusive:

The window panel cannot be installed in windows less

than 559mm high, as you will be unable to shut the

exhaust cover.

In such cases the exhaust cover will have to be removed

prior to installing the window panel.

• Remove the adjustment panel from the window panel,

and cut the window panel to the same height as the

window.

• Open the window sash and place the window panel

on the window frame.

• Secure the window panel to the window frame with 

screws.

Insect guard net

Hole

Projection

Rain guard

“A”

Projection

Window

panel

Window

panel

Window

panel

Exhaust cover

Cut

559mm - 609mm

Adjustment panel

Foam seal A

(adhesive type)

1 ... 13 14 15 ... 27

Comments to this Manuals

No comments

Electrolux U31175 LU4 9QQ User Manual Page 14

Comments to this Manuals

Related products and manuals for Conditioners Electrolux U31175 LU4 9QQ