Electrolux ESF4130 User Manual download pdf (Page 6)

Filling with salt

Only use salt specifically designed for use in

dishwashers.

All other types of salt not specifically designed for use in

a dishwasher, especially table salt, will damage the water

softener.

Only fill with salt just before starting one of the complete

washing programmes.

This will prevent any grains of salt or salty water, which

may have been spilled, remaining on the bottom of the

machine for any period of time, which may cause

corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt container.

2. Pour 1 litre of water inside the container (this is necessary

only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the

container is full.

Do not worry if water over

flows from the unit when

filling with salt, this is quite

normal.

4. Replace the cap making

sure that there is no trace

of salt on the screw thread

or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the

control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain

illuminated for 2-6 hours after the salt has been

replenished, assuming the dishwasher remains switched

on. If you are using salts that take longer to dissolve then

this can take longer. The function of the machine is not

affected.

From level 2 upwards, if salt refilling is necessary, the salt

indicator light will illuminate only in setting mode and at the

end of the washing programme. During the run of the

programme it will remain off.

Rinse aid

Rinse aid is automatically added during the last rinse,

ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds

about 110 ml of rinse aid, which is sufficient for 16 - 40

dishwashing programmes, depending upon the dosage

setting.

Filling with rinse aid

1. Open the container by turning the lid (A) anticlockwise.

2. Add the rinse aid until the container is completely full.

The indicator (B) will be completely dark.

3. Top up the rinse aid when the rinse aid indicator light on

the control panel illuminates.

If rinse aid refilling is necessary, the rinse aid indicator

light will illuminate only in setting mode and at the end of

the washing programme.

During the run of the programme it will remain off.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid compartment.

Clean up any rinse aid spilt during filling with an absorbent

cloth to avoid excess foaming during the next wash.

It is possible to deactivate the rinse aid indicator light (see the

following instructions), By default the rinse aid indicator light is

active.

To deactivate the rinse aid indicator light be

sure that the dishwasher is off and then

proceed as follows:

1. Press Intensive 70° 80’ and Normal 65° programme push

buttons simultaneously.

2. While keeping the programme push buttons Intensive 70°

80’ and Normal 65° pressed switch on the dishwasher by

pressing the On/Off push button.

The On/Off indicator light comes on.

At the same time, the indicator lights of the Intensive 70°

80’ and Normal 65° push buttons start flashing.

3. Press the Normal 65° push button, the correspondent

indicator light keeps flashing while the indicator light of the

Intensive 70° 80’ push button turns off.

At the same time the indicator light "end of programme"

starts to flash.

SALE

SALT

SALZ

SEL

SR06

BR01

BR03

SO455

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Electrolux ESF4130 User Manual Page 6

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux ESF4130