Electrolux ESF6510LOX User Manual

ESF6510LOXESF6510LOW... ...EN DISHWASHER USER MANUAL

Manual adjustmentTurn the water hardness dial to the posi-tion 1 or 2.Electronic adjustment1. Press the on/off button to activate theappliance.2.Press

6.3 Filling the rinse aid dispenserABDCMAX1234+-ABDC1.Press the release button (D) to openthe lid (C).2.Fill the rinse aid dispenser (A), nomore than

7.1 Using the detergentABD3020CMAX1234+-B2003A DC1.Press the release button (B) to openthe lid (C).2.Put the detergent in the compartment(A) .3.If the

Opening the door while theappliance operatesIf you open the door, the appliance stops.When you close the door, the appliancecontinues from the point o

8.3 Using salt, rinse aid anddetergent• Only use salt, rinse aid and detergentfor dishwasher. Other products cancause damage to the appliance.• The ri

A1A22.To disassemble the filter (A), pullapart (A1) and (A2).3.Remove the filter (B).4.Wash the filters with water.5.Before you put the filter (B) bac

Problem Possible solution Press Start. If the delay start is set, cancel the setting orwait for the end of the countdown.The appliance does not fill

•The programme indicators and go off.• The programme indicator continues to flash.• The display shows the current set-ting.Rinse aid dispenser offRi

18www.electrolux.com

ENGLISH 19

CONTENTS1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUCT DESCRI

www.electrolux.com/shop156965510-A-492012

1. SAFETY INSTRUCTIONSBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsi

from the mains socket. Contact theService to replace the water inlet hose.1.3 Use• This appliance is intended to be used inhousehold and similar appli

2. PRODUCT DESCRIPTION2354810 6712 9 1111Worktop2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Water hardness dial8Rinse aid dis

3. CONTROL PANEL12 4 567831On/off button2Program button3Programme indicators4Display5Delay button6Start button7Indicators8Option buttonIndicators Desc

4. PROGRAMMESProgramme Degree of soilType of loadProgrammephasesOptions 1)Normal soilCrockery and cut-leryPrewashWash 50 °CRinsesDryEnergySaver 2)AllC

1) The pressure and the temperature of the water, the variations of the mains supply, theoptions and the quantity of dishes can change the values.Info

4. Press Delay.•The programme indicators and go off.•The programme indicator con-tinues to flash.• The display shows the current set-ting.Acoustic