Electrolux ESL4200LO User Manual download pdf (Page 7)

4. Press immediately Program.

•

The programme indicator

comes on with fixed light.

•

The programme indicator

starts to flash.

5. Wait until the programme indicator

goes off. The programme indi-

cator

continues to flash.

6. Press Program. The end indicator

comes on. The acoustic signal for the

end of programme is activated.

7.

Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

How to deactivate again the acoustic

signal for the end of programme

1. Refer to “How to activate the acoustic

signal for the end of programme” and

follow the procedure from step (1) to

step (5). The end indicator is on.

2. Press Program. The end indicator

goes off. The acoustic signal for the

end of programme is deactivated.

3. Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-

ter softener agrees with the water

hardness in your area. If not, adjust

the water softener. Contact your local

water authority to know the water

hardness in your area.

2.

Fill the salt container.

3. Fill the rinse aid dispenser.

4.

Open the water tap.

5. Processing residues can stay in the

appliance. Start a programme to re-

move them. Do not use detergent and

do not load the baskets.

6.1 Adjusting the water softener

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

51 - 70 91 - 125 9.1 - 12.5 64 - 88

2

1)

10

43 - 50 76 - 90 7.6 - 9.0 53 - 63

2

1)

9

37 - 42 65 - 75 6.5 - 7.5 46 - 52

2

1)

8

29 - 36 51 - 64 5.1 - 6.4 36 - 45

2

1)

7

23 - 28 40 - 50 4.0 - 5.0 28 - 35

2

1)

6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1

2)

1

2)

1)

Factory position.

ENGLISH 7

1 2 3 4 5 6 7 8 ... 16

Comments to this Manuals

No comments