Electrolux ESL4200LO User Manual download pdf (Page 9)

6.4 Filling the rinse aid dispenser

M

A

X

1

2

3

4

+

-

A

B

D

C

E

1.

Press the release button (D) to open

the lid (C).

2.

Fill the rinse aid dispenser (A), no

more than the mark 'max'.

3.

Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4.

Close the lid. Make sure that the re-

lease button locks into position.

Fill the rinse aid dispenser when

the lens (E) is clear.

You can turn the selector of the

released quantity (B) between po-

sition 1 (lowest quantity) and posi-

tion 4 (highest quantity).

7. DAILY USE

1.

Open the water tap.

2.

Press the on/off button to activate the

appliance.

• If the salt indicator is on, fill the salt

container.

3.

Load the baskets.

4.

Add the detergent.

5.

Set and start the correct programme

for the type of load and the degree of

soil.

7.1 Using the detergent

20

30

M

A

X

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open

the lid (C).

2.

Put the detergent in the compartment

(A) .

3.

If the programme has a prewash

phase, put a small quantity of deter-

gent on the inner part of the appli-

ance door.

4.

If you use detergent tablets, put the

tablet in the compartment (A).

5.

Close the lid. Make sure that the re-

lease button locks into position.

7.2 Using the combi detergent

tablets

When you use tablets, that contain salt

and rinse aid, do not fill the salt container

and the rinse aid dispenser.

1.

Adjust the water softener to the lowest

level.

2.

Set the rinse aid dispenser to the low-

est position.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments