Electrolux ESL6115 User Manual download pdf (Page 18)

Any electrical and/or plumbing work required to install

this appliance should be carried out by a qualified

electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a

drain.

Building-in

This dishwasher is designed to be fitted under a kitchen

counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for

building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are

required, but only to let the water fill and drain hose and power

supply cable pass through.

The dishwasher incorporates adjustable feet to allow the

adjustment of the height.

During all operations that involve accessibility to internal

components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose,

the drain hose and the supply cable are not kinked or

squashed.

Levelling

Good levelling is essential for correct closure and sealing of

the door.

When the appliance is correctly levelled, the door will not catch

on either side of the cabinet.

If the door does not close correctly, loosen or tighten the

adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting.

Therefore make sure that the counter it is fixed under, is

suitably secured to a fixed structure (adjacent kitchen units

cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the

machine’s supply hose is designed to screw onto a 3/4" inch

gas thread spout.

The water pressure must be within the limits given in the

"Technical specifications". Your local Water Authority will

advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled

when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be

turned either to the left or the right to suit the installation by

means of the locknut. The locknut must be correctly fitted

to avoid water leaks. (Attention! NOT all models of

dishwashers have fill and drain hoses provided with locknut. In

this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have

not been used for a long time, you should run the water for a

few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been

used in another appliance.

The dishwasher is fitted with safety devices that prevent the

wash water returning into the drinking water system and

comply with the applicable plumbing regulations.

Installation instructions

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Electrolux ESL6115 User Manual Page 18

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux ESL6115