1. Press the release button (A) to open the
rinse aid dispenser.
2. Fill the rinse aid dispenser with rinse
aid. The mark 'max.' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam during the subsequent washing
program.
4. Close the rinse aid dispenser.
Adjusting the rinse aid dosage
The rinse aid is set at the factory at position
4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 6
(highest dosage).
Turn the rinse aid dial to increase or de-
crease the dosage.
– Increase the dosage if there are water
droplets or limescale on the dishes.
– Decrease the dosage if there are streaks,
whitish stains or bluish layers on the
dishes.
Wash hands to remove any residue of
rinse aid from skin.
LOADING CUTLERY AND DISHES
Helpful hints and tips
Only use the appliance for household uten-
sils that are suitable for dishwashers.
Do not use the appliance to clean objects
that can absorb water (e.g. sponges,
household cloths).
• Before you load cutlery and dishes, follow
these steps:
– Remove all food remainings and deb-
ris.
– Make burnt, remaining food in pans
soft.
• While you load cutlery and dishes, follow
these steps:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect
in the container or in a deep base.
– Make sure that cutlery and dishes do
not lie inside one another.
6 electrolux
Comments to this Manuals