Electrolux GA55GLVSW User Manual download pdf (Page 10)

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators , , and start

to flash and the display is blank.

2. Press .

• The indicators , and go

off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 5.

• The acoustic signals sound: e.g. 5

intermittent signals = level 5.

3. Press again and again to change

the setting.

4. Press the on/off button to confirm the

setting.

6.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

Use of rinse aid and multi-tablets

together

When you activate the option Multitab, the

rinse aid dispenser no longer releases

rinse aid. However if you are using multi-

tablets and the drying results are not

satisfactory, we suggest to use multi-

tablets and rinse aid together. In this case

you have to activate the rinse aid

dispenser.

The rinse aid dispenser will remain

activated until you modify the setting again

How to activate the rinse aid

dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators , , and start

to flash and the display is blank.

2. Press .

• The indicators , and go

off.

• The indicator continues to flash.

• The display shows the current

setting: = rinse aid dispenser

deactivated.

3. Press

to change the setting.

= rinse aid dispenser activated.

4. Press the on/off button to confirm the

setting.

5. Adjust the dosage of rinse aid.

6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs and

when you set the level of the water

softener. It is not possible to deactivate

these acoustic signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic signal

is deactivated but it is possible to activate

it.

How to activate the acoustic

signal for the end of programme

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators

, , and start

to flash and the display is blank.

2. Press .

• The indicators , and go

off.

• The indicator continues to

flash.

• The display shows the current

setting: = Acoustic signal off.

3. Press to change the setting.

www.electrolux.com10

1 ... 9 10 11 ... 48

Comments to this Manuals

No comments