Electrolux T4350 Installation Manual download pdf (Page 16)

16

Installation

5

5

From machine No. T4250 4250/101240–

T4350 4350/100825–

Reversing door

The loading door is reversible if it does not open

to the desired side.

Reversing

1. Disconnect the power supply to the dryer.

2. Open the operating panel.

3. Demountthelterdoor.

4. Unscrew the door and the front panel.

5. Unscrew the cover plate.

6. Demountthemagneticswitchwithttings.

7. Squeeze out the black strip which is mounted

in the back plate of the component unit

8. Run the cables including the black strip be-

hind the back plate and across the drum.

9. The black strip must be mounted in the hole

on the opposite side.

10. Unscrew the magnetic switch holder.

11. Move dummy plugs B in the side panel to the

opposite side.

12. Mount holder with magnetic switch on the

opposite side, use holes C.

Note! When turning the bracket the wires

are facing downwards. Lead them upwards

towards the operating panel and fasten them

with cable strips.

13. Move speed nuts to the opposite side.

14. Mount the cover plate.

15. Check that all 4 terminal strips are

mounted on the casing.

16. Reverse the front panel and the door and

then mount them.

Check that the felt joint is in good condition.

17. Close the operating panel and mount the

lterdoor.

W00056A

B

B

1 ... 15 16 17 ... 44

Comments to this Manuals

No comments