Electrolux N24 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
12
Vegetable slicer/shredder
The following parts are included:
1. Cookie rail
2. Locking ring
3. Cookie attachment
4. Sausage ring
Assembly
First attach the mincer housing and mincing cylinder to the drive
socket. To operate the cylinder, the sausage ring should be attached,
as illustrated.
Put the cookie attachment in the cylinder with the ‘handle’ turned outwards.
Place the Assistent on its side and adjust so that the cookie attachment
is horizontal. Then tighten the locking ring. Attach the feeder tray.
Tips
Do not run the machine at too high a speed. Cut out a strip of double
greaseproof paper and our it. Pipe the biscuit mix onto this, so it is
easier to lift it onto the baking tray.
IMPORTANT!
Cleaning
The feeder tray and plunger can be washed in a dishwasher. Place
them in the upper dishwasher rack to prevent them from becoming
deformed.
The other parts must be washed by hand.
11
Cookie attachment
Mincer accessory
IMPORTANT!
Unplug the appliance before you attach or remove accessories. Never put your hands or any other object in, as the forcing cylinder
is very sharp. Always use the food plunger. Never leave children alone with a mincer when it is being used. Unplug the appliance
if you leave it unattended.
The following parts are included:
1. Locking ring
2. Pasta disc
There are 4 different pasta discs.
Assembly
First attach the mincer housing and mincing cylinder to the drive socket.
Then assemble the attachment, as illustrated. Place the Assistent on its
side and attach the feeder tray.
Tips
Run machine on high speed. Allow the pasta to be pushed out onto a
kitchen towel. The towel will absorb excess moisture so that the pasta
dries more quickly.
IMPORTANT!
Cleaning
The feeder tray and plugger can be washed in a dishwasher.
Place them in the upper dishwasher rack to prevent them from becoming
deformed.
The other parts must be washed by hand.
10
Pasta attachment
Mincer accessory
IMPORTANT!
Unplug the appliance before you attach or remove accessories. Never put your hands or any other object in, as the forcing cylinder
is very sharp. Always use the food plunger. Never leave children alone with a mincer when it is being used. Unplug the appliance
if you leave it unattended.
The food processor described in these instructions is
only for use with Assistent Kitchen Machine and for
normal familyhousehold use as directed below.
- Never let children play with the equipment or be left
alone while the machine is running.
- Keep hands and utensils away from moving blades
while processing food to reduce the risk of severe
injury to persons or damage yo the machine. As-
craper may be used but must be used only when the
vegetable slicer is not running.
- Do not put any utensil into the food housing. Use of
utensils other than the specially designed food pusher
may damage the machine and void the warranty.
- Wash all attachments parts before using to remove
any manufacturing oils.
- Blades are sharp. Handle carefully.
- To reduce the risk of injury, never place cutting blades
or discs on base without rst putting bowl properly
in place.
- Be certain attachment is securely locked in place
before operating appliance.
- Never feed food by hand. Always use food pusher.
Save these instructions for future use.
The following parts are included:
1. Grater
2. Grater cylinder
Assembly
First attach the mincer housing and mincing cylinder to the drive socket.
Place the Assistent on its side and attach the splash shield and feeder
tray.
Use
Use the grater to grate nuts, almonds, bread crusts, parmesan cheese,
carrots, potatoes, etc. Run the machine at high speed.
IMPORTANT!
Cleaning
The grater, cylinder and all of the attachments should be washed by
hand and left to dry.
Only the feeder tray and plunger can be washed in a dishwasher.
Place them in the upper dishwasher rack to prevent them from becoming
deformed by the hot drying element.
IMPORTANT SAFEGUARDS Read all instructions!
The following parts are included:
1. Drum housing
2. Plunger
3. Wing nut
4. Locking ring
5. Medium shredding drum
6. Slicing drum
7. Coarse shredding drum
Assembly for the rst time
The vegetable slicer/shredder is supplied with one of the drums already
tted.
Select the drum you require. Unfasten the locking ring by twisting it
clockwise and insert the drum selected in the drum housing. Refasten
the locking ring by twisting it anti-clockwise.
Unscrew the wing nut on the drum housing before attaching the hous-
ing to the drive unit, and check that the groove on the drum engages
29
Eng./Am.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments