Electrolux ERN1400AOW User Manual download pdf (Page 10)

Problem Possible cause Solution

Water flows on the floor. The melting water outlet is

not connected to the evap-

orative tray above the com-

pressor.

Attach the melting water

outlet to the evaporative

tray.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' temper-

ature is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are

stored at the same time.

Store less food products at

the same time.

The door has been opened

often.

Open the door only if nec-

essary.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest Authorized Service

Centre.

8.2 Replacing the lamp

CAUTION!

Disconnect the plug from the

mains socket.

1. At the same time, with the fingers

expand up and down the transparent

cover and unhook it in the direction of

the arrows.

1

2

1

2. Replace the lamp with one of the

same power and shape, specifically

designed for household appliances.

(the maximum power is shown on the

light bulb cover).

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door.

Make sure that the light comes on.

8.3 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comments to this Manuals

No comments