Electrolux ERN1400AOW User Manual download pdf (Page 11)

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

9.2 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Authorised Service Centre.

9.3 Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

9.4 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the E.E.C.

Directives.

10. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Comments to this Manuals

No comments