Electrolux EW6C4753CM User Manual download pdf (Page 11)

2. Press and hold touch button (D) for a

few seconds.

The child lock indicator comes on.

It is possible to deactivate

the child lock option while a

programme operates. Press

and hold the same touch

buttons until the child lock

indicator goes off. The Child

Lock function isn't available

for 8 s after switching on the

appliance.

7.2 Adjustment of remaining

laundry moisture

Every time you enter in the

"Adjustment of remaining

laundry moisture" mode,

previously set degree of

remaining moisture will

change into next value ( e.g

previously set will

change into ).

To change the default degree of

remaining moisture:

1. Press the on/off button to activate the

appliance.

2. Use the programme knob to set any

programme.

3. Wait approximately 8 seconds.

4. Press and hold buttons (F) and (E) at

the same time.

One of these indicators comes on:

• the maximum dryness

• the more dry laundry

• the standard dry laundry

5. Press and hold buttons (F) and (E)

again until the indicator of the correct

level comes on.

If the display returns to

the normal mode (the

time of the selected

programme from step 2.

will be displayed), while

setting the degree of

remaining moisture,

press and hold buttons

(F) and (E) once again to

enter to the "Adjustment

of remaining laundry

moisture" mode

(previously set degree of

remaining moisture will

change into next value).

6. After 5 s the display returns to normal

mode.

7.3 Water container indicator

By default, the water container indicator

is on. It comes on when the programme

is completed or when it is necessary to

empty the water container.

If a draining kit is installed

(additional accessory), the

appliance automatically

drains the water from the

water container. In this case

we recommend that you

deactivate the indicator of

the water container.

Deactivating the water

container indicator:

1. Press the on/off button to activate the

appliance.

2. Wait approximately 8 seconds.

3. Press and hold touch buttons (E) and

(D) at the same time.

The display shows one of these 2

configurations:

• The display shows "Off". After 5 s

the display returns to normal

mode.

• The display shows "On". After 5 s

the display returns to normal

mode.

7.4 Buzzer on/off

To deactivate or activate the acoustic

signals, press and hold for approximately

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Comments to this Manuals

No comments