Electrolux Z5960HP User Manual download pdf (Page 8)

421 3

6 7

8 9

1 2 43

English

BEFORE STARTING

1 Check that the s-bag™ is in place.

2 Insert the hose until the catch clicks to engage (press the

catch to release the hose).

3 Attach the telescopic tube or Easy Reach® system telescop-

ic tube (certain models only) to the hose handle and the floor

nozzle (to disconnect, press the lock button and pull apart).

4 The hose can easily be removed from the handle by pressing

the retaining button and pulling out the hose.

5 Pull out the cable and plug it in. Press the foot pedal to

rewind the cable (take hold of the plug to prevent it striking

you).

6 Some vacuum cleaners, depending on the model, are fitted

with an automatic cable winder (Autoreverse). Pull out the

cable and plug it in. Move the control forwards to roll the

cable in and out as required. Move it backwards to lock the

cable in position once it has been rolled out.

7 Press the On/Off button with the foot to start the vacuum

cleaner.

8 Adjust suction power using the suction control on the vacu-

um cleaner or the suction control on the hose handle.

9 If you have a vacuum cleaner with remote control, press

the +/- buttons to adjust suction control (be sure batteries

have been inserted beforehand). You can also start/stop the

cleaner by pressing the centre of the control (as long as the

main cleaner switch is set to on).

Insert the hose into the hose handle until the catches click to

engage (press the catches to release the hose).

English

8228395-04.indd 8 11/15/06 2:43:41 PM

1 2 3 4 5 6 7 8 9 ... 107

No comments

Electrolux Z5960HP User Manual Page 8