Electrolux EFLW427UIW Owner's Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
31
Solutions to Common Inquiries
PROBLEM POSSIBLE CAUSES SOLUTIONS PREVENTIVE
MEASURES
Pilling
(Fibers
ball up
and cling
to fabric.)
Pilling is normal with
synthetic and perma-
nent press fabrics. This
is due to abrasion from
normal wear.
Use a lint brush or
shaver to remove pills.
Use fabric softener
in washer to lubri-
cate fibers.
When ironing, use
spray starch or fab-
ric finish on collars
and cuffs.
Turn items inside
out to reduce abra-
sion.
Residue
or powder
on dark
items;
Stiff, harsh
fabrics.
Undissolved detergent.
Some granular deter-
gents can combine with
hard water minerals to
form a residue.
Overloading washer.
Rewash load. Increase water tem-
perature using hot-
test water safe for
fabric.
• DO NOT
overload
washer.
Use liquid detergent
or nonprecipitat-
ing water condition-
er with powder de-
tergent.
Wrinkling
Overloading washer.
Incorrect wash cycle for
wash load.
Reduce load size.
Rinse in cold water
with liquid fabric soft-
ener using the casual
or delicate cycle.
DO NOT overload
washer.
Remove items from
washer as soon as
cycle is completed.
Use liquid fabric
softener.
Yellow
buildup
of body
soil on
synthetic
fabrics
Agitation time too short.
Wash water temperature
too low.
Not enough detergent.
Soak in detergent
booster or product
containing enzymes.
Wash in hottest water
safe for fabric using
casual cycle.
Increase detergent.
Add bleach safe for
fabric or treat with
color remover.
Select correct cycle.
Use correct amount
of detergent.
Wash synthetics
frequently using hot
or warm water.
Yellow or
brown rust
stains
Iron or manganese in
water supply, water
pipes, or water heater.
To restore discolored
load of whites, use
rust remover safe for
fabric.
DO NOT use chlorine
bleach to remove rust
stains. It may intensify
discoloration.
Use nonprecipitat-
ing water softener.
Before washing,
run hot water for a
few minutes to clear
lines.
Drain water heater
occasionally.
For an ongoing
problem, install an
iron filter in your wa-
ter supply system.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments