Electrolux EWS106110W User Manual download pdf (Page 20)

4. Slide out the relevant plastic spacers.

5. Fill the smaller upper hole and the two

large ones with the corresponding plas-

tic plug caps supplied in the bag con-

taining the instruction booklet.

POSITIONING

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or other kitchen units. Level

the washing machine by raising or lowering

the feet. The feet may be tight to adjust as

they incorporate a self locking nut, but the

machine MUST be level and stable. If nec-

essary, check the setting with a spirit level.

Any necessary adjustment can be made

with a spanner. Accurate levelling prevents

vibration, noise and displacement of the

machine during operation.

Caution! Never place cardboard,

wood or similar materials under the

machine to compensate for any

unevenness in the floor.

WATER INLET

Warning! This appliance must be

connected to a cold water supply.

1. Connect the water inlet hose supplied

with the machine to a tap with a 3/4"

thread. Always use the hose supplied

with the appliance.

Important! Do not use the hose from

your previous machine to connect to

the water supply.

2. The other end of the inlet hose which

connects to the machine can be turned

as showed in the picture.

Do not place the inlet hose downwards.

Angle the hose to the left or right de-

pending on the position of your water

tap.

45°

35°

20 electrolux

1 ... 19 20 21 22 23 24

Comments to this Manuals

No comments