Electrolux ESI64060X User Manual download pdf (Page 12)

2. The digital display shows the current

setting for the rinse aid dispenser.

Rinse aid dispenser

deactivated

Rinse aid dispenser

activated

3. Press the start/cancel button to change

the setting. The digital display shows

the new setting.

4. Turn the programme knob to the off po-

sition to save the operation.

To use normal detergent again:

1. Deactivate the multitab function.

2. Fill the salt container and rinse aid

dispenser.

3. Adjust the water hardness setting

to the highest level.

4. Do a washing programme without

dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the rinse aid dosage.

SELECT AND START A WASHING PROGRAMME

Do these steps to set and start a washing

programme:

1. Close the door.

2. Turn the programme knob to set the

washing programme. Refer to the chap-

ter 'Washing programmes'.

– The phase indicator light or lights for

the washing programme come on.

– The programme duration in the digital

display flashes.

3. Press the start/cancel button.

– The washing programme starts auto-

matically.

– When the programme starts, only the

indicator light of the phase in pro-

gress stays on. Programme duration

is on with a static light.

When the washing programme oper-

ates, you cannot change the pro-

gramme. Cancel the washing pro-

gramme.

Warning! Only interrupt or cancel a

washing programme if necessary.

Caution! Open the door carefully. Hot

steam can come free.

Interrupting a washing programme

Open the door.

• The programme stops.

Close the door.

• The programme continues from the point

of interruption.

Cancelling a washing programme

•Press and hold the start/cancel button.

– In the digital display the time duration

of the programme flashes.

– One or more phase indicator lights are

on.

The washing programme is cancelled.

At this time you can do these steps:

1. Switch off the appliance.

2. Set a new washing programme.

Fill the detergent dispenser with deter-

gent before you set a new washing pro-

gramme.

Setting and starting a washing

programme with delay start

1. Set a washing programme.

2. Press the delay start button until the dis-

play shows the necessary delay start

time for the washing programme. Delay

start time flashes in the digital display.

3. Press the start/cancel button.

– The countdown of the delay start

starts.

– The phase indicator lights of the

washing programme go off.

– In the digital display the delay start

time is on with a static light.

When the countdown is completed, the

washing programme automatically starts

The phase indicator light of the phase in

progress comes on.

Do not open the door during the count-

down to prevent interruption of the

countdown. When you close the door

again, the countdown continues from

the point of interruption.

Cancelling a delay start

1. Press and hold the start/cancel button.

– The phase indicator lights or light

come on.

12 electrolux

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments