Electrolux ESI64060X User Manual download pdf (Page 5)

– To deactivate/activate the rinse aid dis-

penser. Refer to 'Multitab function'.

Start/cancel button

Use the start/cancel button for these opera-

tions:

• To start the washing programme. Refer

to the chapter 'Setting and starting a

washing programme'.

• To cancel a washing programme in pro-

gress. Refer to the chapter 'Setting and

starting a washing programme'.

• To set the water softener level. Refer to

the chapter 'Set the water softener'.

• To deactivate/activate the rinse aid dis-

penser. Refer to the chapter 'Multitab

function'.

Multitab button

Press this button to activate/deactivate the

multitab function. Refer to the chapter 'Mul-

titab function'.

Delay start button

Use the delay start button to delay the start

of the washing programme with an interval

between 1 and 19 hours. Refer to the

chapter 'Setting and starting a washing

programme'.

Digital display

The display shows:

• Adjusted level of the water softener.

• Activation/deactivation of the rinse aid

dispenser (only with multitab function on).

• Programme duration.

• Remaining time to the end of the pro-

gramme.

• End of a washing programme, the digital

display shows a zero.

• Number of hours in delay start.

• Fault codes.

Setting mode

The appliance is in setting mode when:

• One or more phase indicator lights are

on.

• The time duration of the programme

flashes in the digital display.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the rinse aid dis-

penser.

The appliance is not in setting mode when:

• One or more phase indicator lights are

on.

• The time duration of the programme

does not flash.

In this condition cancel the programme to

go back to the setting mode. Refer to the

chapter 'Setting and starting a washing

programme'.

USE OF THE APPLIANCE

Refer to the following instructions for each

step of procedure:

1. Make a check if the water softener level

is correct for the water hardness in your

area. If necessary set the water soften-

er.

2. Fill the salt container with dishwasher

salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish-

washer.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use combi detergent tablets ('3 in

1', '4 in 1', '5 in 1', etc.), refer to the

chapter 'Multitab function'.

SETTING THE WATER SOFTENER

The water softener removes minerals and

salts from the water supply. Minerals and

salts can have bad effect on the operation

of the appliance.

Water hardness is measured in equivalent

scales:

• German degrees (dH°).

• French degrees (°TH).

electrolux 5

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments