Electrolux ESI64060X User Manual download pdf (Page 6)

• mmol/l (millimol per litre - international

unit for the hardness of water).

•Clarke.

Adjust the water softener to the water hard-

ness in your area. If necessary, contact

your local water authority.

Water hardness Water hardness setting

°dH °TH mmol/l Clarke manually electronically

51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10

43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9

37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8

29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7

23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6

19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1

1)

1

1)

1) No use of salt required.

You must set the water softener man-

ually and electronically.

Manual adjustment

The appliance is set at the factory at

position 2.

1. Open the door.

2. Remove the lower basket.

3. Turn the water hardness dial to position

1 or 2 (refer to the chart).

4. Install the lower basket.

5. Close the door.

Electronic adjustment

The water softener is set at the factory

at level 5.

The appliance must be switched off.

1. Press and hold the start/cancel button.

Turn the programme knob counter-

clockwise until the programme marker

agrees with the first washing pro-

gramme on the control panel.

2. Release the start/cancel button when

the digital display shows the current set-

ting.

Examples:

–

level 5 =

–

level 10 =

3. Press the start/cancel button to change

the water softener level. Every time you

press the button, the level increases.

4. Turn the programme knob to the off po-

sition to save the operation.

USE OF DISHWASHER SALT

Caution! Only use dishwashers salt.

Types of salt that are not applicable for

dishwashers cause damage to the

water softener.

Caution! Grains of salt and salty water

on the bottom of the appliance can

cause corrosion. Fill the appliance with

salt before you start a washing

programme to prevent corrosion.

Do these steps to fill the salt container:

1. Turn the cap anticlockwise to open the

salt container.

2. Fill the salt container with 1 litre of water

(only the first operation).

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments