Electrolux GA552F101 User Manual download pdf (Page 39)

installation electrolux 39

Installation

Any electrical and/or plumbing

work required to install this

appliance should be carried out by

a qualified electrician and/or

plumber or competent person.

Remove all packaging before

positioning the machine.

If possible, position the machine next

to a water tap and a drain.

This dishwasher is designed to be

fitted under a kitchen counter or

worksurface.

No further openings for the venting of

the dishwasher are required, but only

to let the water fill and drain hose and

power supply cable pass through.

During all operations that involve

accessibility to internal components

the dishwasher has to be unplugged.

When inserting the machine, ensure

that the water inlet hose, the drain

hose and the supply cable are not

kinked or squashed.

Fixing to the adjacent units

The dishwasher must be secured

against tilting.

Therefore make sure that the counter

it is fixed under, is suitably secured to

a fixed structure (adjacent kitchen

units cabinets, wall).

A hot water supply is not always

efficient with very soiled crockery as it

shortens the washing programmes a

lot.

For making the connection itself, the

coupling nut fitted to the machine’s

supply hose is designed to screw onto

a 3/4" gas thread spout or to a

purpose made quick-coupling tap

such as the Press-block.

The water pressure must be within

the limits given in the "Technical

data". Your local Water Authority will

advise you on the average mains

pressure in your area.

The water inlet hose must not be

kinked, crushed, or entangled when it

is being connected.

The dishwasher features fill and drain

hoses which can be turned either to

the left or the right to suit the

installation by means of the locknut.

The locknut must be correctly fitted

to avoid water leaks.

(Attention! NOT all models of

dishwashers have fill and drain hoses

provided with locknut. In this case,

this kind of facility is not possible).

If the machine is connected to new

pipes or pipes which have not been

used for a long time, you should run

the water for a few minutes before

connecting the inlet hose.

DO NOT use connection hoses

which have previously been used

for an old appliance.

Installation of an IRG filter is

recommended on the construction

side.

Water supply connections

This dishwasher may be fed with

either hot (max. 60°) or cold water.

Nevertheless we advise you a cold

water supply.

117987 91/0en 18-05-2007 8:33 Pagina 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comments to this Manuals

No comments